What's the best way to measure a person for TiLite's footrest to seat sling length?
Every time I measure myself I get between 12" and 13" but that's because I'm factoring in my cushion* height and the fact that my right hip and knee are in searing pain at even a 90 degree sitting angle (undiagnosed condition, probably is related to my dystonia and hypermobility issues) and so my knees are needing to be positioned higher than my hips for this reason. TiLite's "free" option only shortens to 13.5", unless anyone knows if it can go shorter than that without High Mount?
My "seating specialist" has been of limited help (limited to what seat width I should get) (yeah, I paid $50 for that info- sheesh!). I'm a petite person at 5'2" and it seems as though I just prefer too much dump. I really don't want to use High Mount if I don't have to. They look dorky and they cost extra money.
Oh, and the EZ-Ti configurator didn't even have High Mount as an option for me with the Flip Back footrest (of which I will NOT budge on, I want the Flip Back).
*I have a Supracor Stimulite Classic XS flat bottom
----------------------------------------------------------------------------------------------------------------------------
Current EZ-Ti Configuration (some of these measurements are calculated guesses, feel free to pipe in with comments/corrections)

Every time I measure myself I get between 12" and 13" but that's because I'm factoring in my cushion* height and the fact that my right hip and knee are in searing pain at even a 90 degree sitting angle (undiagnosed condition, probably is related to my dystonia and hypermobility issues) and so my knees are needing to be positioned higher than my hips for this reason. TiLite's "free" option only shortens to 13.5", unless anyone knows if it can go shorter than that without High Mount?
My "seating specialist" has been of limited help (limited to what seat width I should get) (yeah, I paid $50 for that info- sheesh!). I'm a petite person at 5'2" and it seems as though I just prefer too much dump. I really don't want to use High Mount if I don't have to. They look dorky and they cost extra money.
Oh, and the EZ-Ti configurator didn't even have High Mount as an option for me with the Flip Back footrest (of which I will NOT budge on, I want the Flip Back).
*I have a Supracor Stimulite Classic XS flat bottom
----------------------------------------------------------------------------------------------------------------------------
Current EZ-Ti Configuration (some of these measurements are calculated guesses, feel free to pipe in with comments/corrections)
Stock Code | Price | HCPCS Code | ||
TiLite Aero Z | Yes | AZFS1 | $2,425 | K0005 |
Frame Finish | To Be Decided | |||
Anodize Color | To Be Decided | |||
Rear Seat Width | 16" | A2RSW4 | STD | |
Front Seat Taper | No Taper | A2FSW1 | STD | |
Seat Depth | 15" | A2SD1 | STD | |
Custom Frame Depth | None | A2SD3 | STD | |
Front Seat Height | 18" | A2FSH1 | STD | |
Rear Seat Height | 14.5" | A2RSH1 | STD | |
Front Angle | 85 degrees | A2FA1 | STD | |
Footrest Type | Flip-Back Footrest | A2FTR12 | $203 | K0040 K0037 |
Seat to Footrest | 13.5" | STD | ||
Footrest Width | 10" (3.5" Taper) | A2FE1 | STD | |
Seat Back Type | Folding Aluminum Adjustable Height | A2SB1 | STD | |
TiShaft? Back Release Bar | Aluminum | A2SB3 | STD | |
Seat Back that Locks when Folded | Yes | A2SB11 | NCO | |
4" Deep Backrest Rigidizer Bar | Yes | A2SB19 | NCO | |
Push Handles | Integrated Push Handles | A2SB6 | NCO | |
Seat Back Height | 10.5"-12.5" (Short) | STD | ||
Set Seat Back Height | 10.5" | STD | ||
Seat Back Angle | 86 degrees | A2SBA1 | STD | |
Center of Gravity | 3" | A2COG1 | STD | |
Camber Tube | Aluminum Camber Tube | A2CBR15 | STD | |
Camber | 2 degrees | A2CBR1 | STD | |
Camber Plugs | Adjustable Rear Wheel Spacing Camber Plugs | A2CBR12 | STD | |
Extra Spacers | Yes | A2CBR9 | NCO | |
Rear Wheel Spacing | 1" | A2RWS1 | STD | |
Front Wheels | 4"x1.5" LiteSpeed Plastic Wheel w/ Soft Roll Tire | A2FW26 | $83 | |
Front Forks | TiLite Standard Fork | A2FK1 | STD | |
Rear Wheels | TiLite Shadow 24" (540) | A2RW14 | STD | |
Axles | Stainless Quick Release | A2AXL1 | STD | |
Rear Tires | Schwalbe? Marathon Plus Evolution | A2RTR8 | $125 | |
Handrims | Surge | A2RIM10 | $364 | |
Tab Length | Long Tabs | A2RIM7 | STD | |
Wheel Locks | O-F Composite Push to Lock | A2WLK7 | NCO | |
Back Upholstery | Velcro Adjustable | A2BUP2 | STD | |
Seat Upholstery | Tension Adjustable Bolt-On | A2SUP1 | STD | |
Side Guards | Aluminum Quad Removable w/ Hole Standard | A2SDG3 | $192 | |
Anti-Tips | User Friendly Flip-Up | A2TIP2 | $307 | E0971 |
Total | $3,699 |
TiLite Aero Z ordering issue: footrest length specs
0 commentaires:
Enregistrer un commentaire